• [alt2]

Paper Processing Industry Boiler

  • Capacity 0.1~220t/h
  • Available Fuel coal, biomass fuel, oil, gas, electric, etc.
  • Heating Medium steam, hot water, thermal oil, hot air
  • Brief Intro In paper processing industry, steam is generally used for drying to improve the strength and smoothness of paper, and it also used for hot pressing, strewing, concentration, etc. Sitong boiler could customize the specific boilers based on users’ requireme

We're here to help:Easy ways to get the answers you need

get priceSend Email





Steam is necessary for paper processing industry. Usually, steam is used for drying to improve the strength and smoothness of paper. The water content of wet paper still as high as 53%~70% after squeezing, and it is not useful by using mechanical stress for anhydration, so, use cast iron dryer to dry paper, cooperate with the use of steam boiler. Except drying, it can also use for corrugated paper processing, andsupport the use of calender and glue paste roller.


Uses of Boiler & Steam in Paper Processing Industry


 Types and specifications of Boilers Suitable for Paper Processing Industry


SZL Biomass Fired Chain Grate Steam Boiler

Capacity: 0.5~25t/h
Fuel: bagasse, wood, straw, rice husk, and other biomass fuels.

SZL double drum boiler adopts membrane wall and automatic feeding system, has the advantages of high thermal efficiency (97%), sufficient output, high steam quality, and low pollution. During the paper processing, there are large amounts of waste materials, biomass fired boiler could use these wastes as fuel, save cost.


 WNS Horizontal Type Oil Gas Fire Tube Steam Boiler

Capacity: 1~30 t/h
Fuel: heavy oil, diesel, natural gas, LPG, city gas, coke gas, etc.

WNS series steam boiler smoke gas three pass and wet back structure, achieve high thermal efficiency (98%) . This is fire tube boiler, low water quality requirement, the failure rate is lower than 0.1. Adopts international excellent burner, PLC automatic control cabinet, and safety interlock device, operate safely and conveniently.
 


Circulating Fluidized Bed Steam Boiler

Capacity: 6~220t/h
Fuel: coal, wood, straw, and other biomass fuels.
 

Circulating fluid bed boiler is a large capacity boiler, adopts the advanced technology of cyclone fluid combustion, cyclone separation structure & parametric design, and loop seal device, has the advantages of energy saving, high thermal efficiency, sufficient output, and high steam quality. Moreover, the boiler could deal with the wastes (bark, waste wood material, black liquid) produced during paper processing through combustion, save operation cost.
 



Price of Paper Processing Industry Boilers

The price of paper processing industry boilers are based on the capacity and accessories. Generally, the accessories of boilers include burner/grate, electric controller, steam header, water softener, BFW pump, platform ladder, and chimney, etc. If you would like to use the specific devices (brand, materials, quantity, etc.) or the additional equipment (air preheater, economizer, condenser, etc.), the prices are quite different. So, if you would like to get the exact price, please inquire for the details.

 How to Select a Proper Boiler for Paper Processing Industry

1. Determine the capacity of the boiler. The boiler capacity should based on the Heating Load Curve or Heat Balance Diagram, and includes the heat loss in pipelines, self-used heat of boiler room, available used waste heat. While, usually, it is difficult to get the Heating Load Curve, the heating load could get based on the max thermal consumption per hour within production/heating/domestic, and then determine by using the coefficient.

2. Determine the heating supply medium. Generally, the brewery industry uses the steam boiler for production. If there are large hot water demanded as well, both steam boiler and hot water boiler should be used.

3. Determine the boiler heating parameters, including pressure, temperature, etc.

4. Determine the boiler efficiency. In order to benefit for economic management, the boilers should have high thermal efficiency, and the boiler output, quantity and other performances have to adapt to the change of heat loading.

5. It’s better to select the boilers with same capacity or combustion equipment. If different, the max limitation is two models, to decrease the problems of equipment layout and management.

  

Parameter

 

Inquiry :

Contact us now if you have any question about our company and products. Any of your inquiry and suggestion will be highly appreciated. We will keep your information completely private.

Inquiry
Name*
Tel*
E-mail*
Message*